Gate generator/modifier
2.2.0
Author: Alfredo Santamaria
License: See EULA
Last updated:
Created:
Plugin: AS Seqs n Tools
ReGate turns triggers into gates of the length you choose, with two channels. It also works the other way: set a short length to turn long gates into short triggers.
Each channel has:
- LENGTH: the length of the output gate. The tooltip shows it in milliseconds.
- S / L switch: the range of LENGTH. Short goes from 1 ms to 70 ms; Long goes from 1 ms to 490 ms.
Inputs and outputs
Each channel has an input (I) for a clock, trigger or gate, and an output (O) with the new gate.
LENGTH and the S/L switch each have a CV input, so you can change them from another module.
Settings
Right-click the panel to set:
- “Overlapping gates”: what happens when a new pulse arrives while the gate is still HIGH.
- Merge (the default): the gate is extended, so pulses close together become one long gate. Useful for ties or slides.
- Retrigger: the output drops for a moment and a new gate starts with its full length, so every input pulse gives a new gate. Use it when the gate is longer than the time between pulses, for example after ReSwing.
- “Panel” theme: Follow Rack, Light or Dark.
Starter tips
Patch a clock into I and the output into an envelope: LENGTH now sets how long each note is held.
Send the output to an envelope that controls a filter, then move LENGTH with an LFO for notes that open and close in different ways.
Feed the gates of a sequencer through ReGate with a short length to get clean triggers for drums.
