8 channel sample & hold combined with a shift register
2.6.4
Author: VCV
License: GPL-3.0-or-later
Last updated:
Created:
Plugin: VCV Free
VCV S&H ASR combines the concepts of a Sample & Hold module, which “freezes” an input voltage when triggered, and an Analog Shift Register, which shifts voltage values down an array of outputs when triggered.
When each row is triggered by its TRIG input, the current IN voltage is sampled and held at the S&H output until triggered again. Each TRIG input is normalized to the input above it, so a trigger sent to a row is sent to all TRIG inputs below it, until a patched TRIG input is reached. The PUSH button triggers row 1, which triggers all rows below it until a patched TRIG input is reached.
Each row’s IN input is normalized to the S&H output of the row above it. This allows the array of S&H outputs to act as an Analog Shift Register when the IN inputs are unpatched. For example, when PUSH is pressed, the current IN 1 signal is sampled to S&H 1, the old S&H 1 value is moved to S&H 2, the old S&H 2 value is moved to S&H 3, and so on.
Press CLEAR to set all S&H outputs to 0V.
Press RND to normalize IN 1 to a random signal. When enabled, triggering row 1 with an unpatched IN 1 input will sample a random voltage to S&H 1. Right-click the panel to change the “Random range” of the random generator.
All S&H output voltages are saved/recalled in your patch, so reloading your patch or restarting Rack restores all sampled voltages.
