AS ReFluke

S&H/Noise/Gate generator

Noise Random Sample and hold


2.2.0

AS Seqs n Tools website

User manual

Author: Alfredo Santamaria

Author email:

Changelog

License: See EULA

Last updated:

Created:

Plugin: AS Seqs n Tools

Browse all modules from AS


ReFluke is a noise generator, a sample & hold and a gate generator in one module. Use it for noise sounds, random voltages that change with your clock, or short gates to trigger envelopes.

  • NOISE: the noise color: White, Pink, Red or Grey.
  • CLK DIV: divides the clock at TRIG, from 1 to 16, to slow down the sample & hold.
  • SCALE: sets the range of the S&H output, from -1 to 1. At 1 it uses the full 10V range; negative values flip it.
  • OFFSET: moves the S&H output up or down.
  • N / G switch: what the N/G output sends: Noise, or a short Gate (100 ms) on each divided clock pulse.
Inputs and outputs

IN replaces the internal noise as the source for the sample & hold. Patch an LFO or any other signal here for a different kind of stepped voltage.

TRIG is the clock input for the sample & hold and the gate generator.

N/G O is the noise or gate output, depending on the N/G switch. S&H O is the sample & hold output: on each divided clock pulse it grabs the value of the source and holds it until the next one.

Settings

Right-click the panel to set the “Panel” theme: Follow Rack, Light or Dark.

Starter tips

Patch a clock into TRIG and the S&H output into a quantizer such as ReQ for random melodies.

Use SCALE and OFFSET to keep the random voltage inside the range you need, for example a gentle filter movement.

Set the switch to G to get a short gate on each divided clock pulse, ready to trigger an envelope.