A-B-Y Switch
2.2.0
Author: Alfredo Santamaria
License: See EULA
Last updated:
Created:
Plugin: AS Seqs n Tools
A/B/Y is a switch for signals, with two sections. Send one signal to output A or B, or pick which of two signals, A or B, goes to the output.
- IN ▶ A/B (top section): click the button to send the IN signal to output A or output B.
- A/B ▶ OUT (bottom section): click the button to choose which input, A or B, goes to OUT.
The light on each button shows the current position. Switching fades over 10 ms, so it doesn’t click, even when you switch again in the middle of a fade.
Inputs and outputs
Each section has an EXT input: a trigger there works like a click on the button, so another module or a sequencer can do the switching.
The signal inputs and outputs are polyphonic: one cable can carry up to 16 signals, and the button switches all of them at once. In the top section, A and B carry as many channels as IN. In the bottom section, OUT carries as many channels as the larger of A and B, in both positions, so the voices of a polyphonic module after it don’t move when you switch. If one input is mono and the other is polyphonic, the mono signal is copied to every channel.
It works the same for audio and for CV. Switching between two pitch CVs (1V/octave) sounds like a short glide, because of the 10 ms fade.
Settings
Right-click the panel to set the “Panel” theme: Follow Rack, Light or Dark.
Starter tips
Patch a clock divider into EXT to switch between two sounds every bar.
Use the top section to send one sequence to two different voices and swap between them during a performance.
Use the bottom section to pick between two sequences, or two effects, with a single trigger.
Merge several signals into one cable with VCV Merge, switch them with A/B/Y and split them with VCV Split to reroute a whole group of signals at once.
