
Infinite-Noise Simple LFO4-ss
4HP quad LFO: four independent knob-set rates, Saw and Sine per LFO, internal hard/soft sync, Rate Chaos, and uni/bipolar range.

Infinite-Noise Simple LFO4-st
4HP quad LFO: four independent knob-set rates, Square and Triangle per LFO, internal hard/soft sync, Rate Chaos, and uni/bipolar range.

Infinite-Noise Tiny LFO
2HP Tiny LFO with knob/CV rate, PWM, Rate Chaos, and uni/bipolar range. Outputs Saw, Square, Triangle and Sine (polyphonic).

Infinite-Noise LFO1
4HP LFO with knob/CV rate, PWM, MOD, external sync in/out, n-shot, Rate Chaos, and uni/bipolar range. Outputs Saw, Square, Triangle and Sine (polyphonic). Square+MOD acts as a wavetable (Triangle <-> Square <-> Saw).

Infinite-Noise Phase-Driven LFO
4HP phase-driven LFO: incoming phase CV sets the waveform (no internal oscillator). PWM, MOD, wrap, and uni/bipolar range. Outputs Saw, Square, Triangle and Sine (polyphonic).

Infinite-Noise Tweak-2 Mk I
2HP dual attenuverter: shared knob/CV scale (1x, 2x, 5x, 10x) and offset. Polyphonic, quantize, stereo-friendly. No mix.

Infinite-Noise Tweak-2 Mk II
2HP dual attenuverter: individual knob scale (1x, 2x, 5x, 10x) and offset, plus averaging mix. Polyphonic, quantize. Optional A/B link.

Infinite-Noise Tweak-4 Mk I
2HP quad attenuverter: shared knob scale (1x, 2x, 5x, 10x) and offset across four signals. Polyphonic, quantize. No mix.

Infinite-Noise Tweak-4 Mk II
7HP quad attenuverter: individual knob/CV scale (1x, 2x, 5x, 10x) and offset, plus averaging mix. Quantize, optional link-to-A.

Infinite-Noise Tweak-8
14HP 8-section attenuverter: individual knob/CV scale (1x, 2x, 5x, 10x) and offset, plus averaging mix. Quantize, optional link-to-A.

Infinite-Noise VCA-2
2HP dual VCA: independent knob/CV gain (0-100%) per section. Polyphonic, lin/exp/log, optional A/B link.

Infinite-Noise VCA-4 Mk I
2HP quad VCA: shared knob/CV gain (0-100%) across four signals. Polyphonic, lin/exp/log.

Infinite-Noise VCA-4 Mk II
4HP quad VCA: independent knob/CV gain (0-100%) per section. Polyphonic, lin/exp/log, optional A/B, B/C and/or C/D link.

Infinite-Noise Clamp 4
2HP quad clamp: min/max range with invert, plus Diff and Gate modes. Polyphonic, optional 2x oversampling, min/max link.

Infinite-Noise Auto-Scale 4
2HP quad auto-scale: fits each input into a min/max range (with invert). Polyphonic, reset, lock, min/max link.

Infinite-Noise Manuel Trigger, Gate and CV
2HP performance controller: 1 trigger, 2 latchable gates, and 2 CV knobs (-10V to +10V). Polyphonic, CV quantize.

Infinite-Noise Manuel Push 2
2HP dual controller: latchable buttons with gate and high/low trigger outputs, plus CV in. Converts gates to triggers (or vice versa).

Infinite-Noise Manuel Trigger 8
4HP controller: 8 momentary trigger buttons, All, and a polyphonic output.

Infinite-Noise Manuel Gate 8
4HP controller: 8 latchable gate buttons, All, and a polyphonic output.

Infinite-Noise Manuel CV 8 Mk I
4HP controller: 8 CV knobs (-10V to +10V), mute, and a polyphonic output. Quantize.

Infinite-Noise Manuel CV 8 Mk II
8HP controller: 8 On/Off CV pairs with toggle buttons, All, attenuate, and a polyphonic output. Quantize.

Infinite-Noise Manuel Mute 8
6HP 8-channel mute: per-section buttons and CV, All, latch, and a mute-value knob/CV.

Infinite-Noise CV-Toggle 8
8HP 8-section On/Off switch: CV or knob values, gate/trigger per section, All, and attenuate.

Infinite-Noise CV to Gate
2HP fire a gate if CV is within a specified min/max range. Also above, below, inverted-range, and Diff.

Infinite-Noise CV to Gate/Trigger 8
8HP 8 sections can fire a gate or trigger if CV is within a specified min/max range. E.g., you can input a single CV signal and have up to 8 gate/trigger outputs that can fire independently based on the value of the CV input.

Infinite-Noise Manuel Mix 4 Mk I
2HP mixer: 4 inputs, per-input knobs (0-200%), master, unity or averaging mix.

Infinite-Noise Manuel Mix 4 Mk II
4HP mixer: 4 inputs, per-input knob/CV (0-200%), individual outputs plus mix, unity or averaging.

Infinite-Noise Manuel Mix 4 Stereo
4HP stereo mixer: 4 stereo inputs, per-input knob/CV (0-200%), stereo mix, unity or averaging. Optional mono-to-stereo.

Infinite-Noise Matrix Mix 5x5
14HP mono 5x5 matrix mixer: per-row invert/gain, linked column sends, per-column unity or averaging mix, range 0–1x or ±1x, level CV/trim, Min/Max/Avg/Rng.

Infinite-Noise Matrix Mix 4x4 Stereo
22HP stereo 4x4 matrix mixer: per-row L/R norm, balance/pan, gain, linked unipolar sends, per-column unity or averaging mix, L/R level lights, and Avg outputs.

Infinite-Noise Stereo Balance/Pan
2HP stereo balance/pan with post gain 0–200%, CV/trim, and L/R level lights. Polyphonic audio; Right input normalizes from Left.

Infinite-Noise Mult2x4
2HP dual mult: two inputs with four copies each, or 1-to-8 if the lower input is unused.

Infinite-Noise Merge2x4
2HP dual merge: two 4-to-1 sections, sum or averaging mix, with optional negative-value handling.

Infinite-Noise Merge/Mult-4
2HP merge/mult: 4-to-1 sum or averaging mix, plus a 1-to-4 copy. Mult defaults to the merge.

Infinite-Noise Tiny Logic Comparator-2
2HP dual logic: 4 inputs per section, AND/OR/XOR with invert (NAND/NOR/XNOR). Inputs can be inverted individually via context menu.

Infinite-Noise Logic Comparator-2
4HP dual logic: all six Boolean outputs per section, plus True/False switch inputs. Buttons next to each input can invert the input individually.

Infinite-Noise Logic Comparator-6x2
6HP 6-section logic: 2 inputs each, AND/OR/XOR with invert (NAND/NOR/XNOR). Chainable. Inputs can be inverted individually via context menu.

Infinite-Noise Value Comparator-1
4HP value compare: A=B, A!=B, A>=B, A>B, A<=B, A<B, with tolerance, A/B-cross trigger, and clamp. True/False switch.

Infinite-Noise Value Comparator-2 Mk I
4HP dual value compare: two sections of A=B, A!=B, A>=B, A>B, A<=B, A<B, with True/False switch inputs.

Infinite-Noise Value Comparator-2 Mk II
4HP value compare and math: Min, Max, NtZ, FfZ, Abs-diff, and Avg of A/B, and Int/Frac of C and Plus, Minus, Mul, Div of C/D.

Infinite-Noise S&H/T&H-2
2HP dual S&H/T&H/H&T: one in/out per section, clock in or internal LFO, Rate Chaos. Internal noise if unpatched.

Infinite-Noise S&H/T&H-2x4
4HP dual S&H/T&H/H&T: four in/out per section, clock in or internal LFO, Rate Chaos. Internal noise if unpatched. A clock normalizes to B.

Infinite-Noise Sample and Update
2HP sample-and-update: Sample, Update, and Reset via button/CV. Can also count triggers and fire one when the desired count is reached.

Infinite-Noise Poly-Merge
6HP merge: up to 16 monophonic signals (or multiple polyphonic signals) into one polyphonic output. Channel count, Mono/Poly mode.

Infinite-Noise Poly-Split
4HP split: a polyphonic signal into up to 16 monophonic signals (or multiple polyphonic signals). Mono/Poly mode.

Infinite-Noise Poly-Stereo
4HP encode/decode: two mono left/right pairs to/from 2-channel polyphonic stereo. If only left is connected, right copies it.

Infinite-Noise Poly-Quad
2HP 4-channel merge/split: encode up to 4 mono signals into poly, and decode poly back to 4 mono. Auto packing or fixed count.

Infinite-Noise Poly-Shuffle
2HP add, repeat, or remove channels of a polyphonic signal. Also next, prev, or shuffle channel order.

Infinite-Noise Poly-Tweak Mk I
2HP invert/disable (mute/remove) poly channels via buttons. Can also construct a polyphonic signal with up to 16 gates.

Infinite-Noise Poly-Tweak Mk II
2HP invert/disable (mute/remove) poly channels based on CV-inputs. Can also mix individual channels of two polyphonic signals.

Infinite-Noise Poly-Logical Compare
2HP logical compare (AND, OR, XOR, NAND, NOR, XNOR) across all channels of one polyphonic signal.

Infinite-Noise Poly-Value Compare
2HP value compare (MIN, MAX, NtZ, FfZ, AVG, R/S) across all channels of one polyphonic signal. Can also monitor since last reset, all channels or per channel.

Infinite-Noise Poly-Offset
4HP offset individual or group of channels of a polyphonic signal. All offset, incremental offset, and 8 knobs.

Infinite-Noise Poly-Scale
4HP scale (attenuvert/amplify) individual or group of channels of a polyphonic signal. All scale, 8 knobs, 1x/2x/5x/10x.

Infinite-Noise Cross-fade 1x2
2HP cross-fade a stereo signal, or two separate mono signals, by knob/CV. A/B toggle, trigger mode, panning, timed fade.

Infinite-Noise Cross-fade 4x1
8HP cross-fade 4 separate signals by per-section and master knob/CV. A/B toggle, trigger mode, flipped outputs, timed fade.

Infinite-Noise Cross-fade switch 4to1
2HP cross-fade/switch up to 4 inputs into 1 output. Knob/CV, trigger order, 2/3/4 ports.

Infinite-Noise Cross-fade switch 1to4
2HP cross-fade/switch 1 input into up to 4 outputs. Knob/CV, trigger order, 2/3/4 ports.

Infinite-Noise Bernoulli Switch
2HP Bernoulli switch with A/B-> (2 in, 1 out) and ->A/B (1 in, 2 out). Probability, clock in or internal LFO, Rate Chaos, fade.

Infinite-Noise ON/OFF Switch
2HP switch between the ON- or OFF-signal via button, gate, or trigger. Knob/CV per state, fade.

Infinite-Noise Combine
2HP combine (switch) 2 inputs: Upper/Lower, A greater than B, or Rise/Fall. Knob/CV param, gate out.

Infinite-Noise Random-4
2HP generates 4 random (polyphonic) values within specified range with center/edge or min/max distribution at each trigger or internal LFO. Rate Chaos, slew.

Infinite-Noise Random Curve
4HP generates 6 shaped random curves within specified range with center/edge or min/max distribution. Internal LFO, Rate Chaos, quantize.

Infinite-Noise Chaos
2HP adds random chaos to an input (or outputs chaos). Range, distribution, slew, Rate Chaos.

Infinite-Noise Arm 3 XY
8HP length and rotation of 3 arms (basically 3 polar vectors) generate a semi-random X/Y curve, plus XY mix. Individual Rate Chaos can be applied to length and/or rotational velocity of each arm.

Infinite-Noise ADR Envelope
4HP Attack-Delay-Release envelope with attack/release time and shape (technically Attack-Sustain-Delay-Release). Rate Chaos can affect each time-setting, changed at each cycle.

Infinite-Noise ADSDR Envelope
6HP Attack-Decay-Sustain-Delay-Release envelope with attack/decay/release time and shape, and levels for Attack, Sustain and Release. Rate Chaos can affect each time-setting, changed at each cycle.

Infinite-Noise Envelope Phase Expander
2HP expander for ADR/ADSDR: phase gates (Attack, Decay, Sustain, Delay, Release, Idle) plus Rise, Steady, Fall. Idle can output phase position (0V to 10V).

Infinite-Noise Slew 2
4HP dual polyphonic constant rate/time slew with knobs and (polyphonic) CV/trim for rise and fall time and shape, Snap (gate/trigger), B-Catch (gate) output, shared Scale/Offset of the input, and envelope follower. Via context-menu the (center) linear shape, can be replaced by an S-Curve shape.

Infinite-Noise Slew 4
2HP quad polyphoinc constant rate/time slew with knobs based rise/fall times/shape settings. Via context-menu the (center) linear shape, can be replaced by an S-Curve shape.

Infinite-Noise Sign
4HP outputs 9 signed versions of the input: Cut-, Cut+, Abs, ×-1, !R, +5, -5, Gate, !Gate.

Infinite-Noise Sign4 Mk II
2HP 4 sections that output absolute value, cut-negative, or cut-positive.

Infinite-Noise Fold
2HP fold or wrap with gain and bias. Bipolar/unipolar range, offset or asymmetric gain.

Infinite-Noise Wave Shaper 2
2HP 3 wave-shaping algorithms on 2 separate signals: 5Sine, Knee, Clamp/Fold.

Infinite-Noise Ring Modulator 3
2HP 3-section ring modulator (A×B). Unpatched sections chain; B defaults to /10.

Infinite-Noise Increment/Decrement Offset
2HP increment or decrement an offset on the input via button/trigger. Knob/CV step, reset.

Infinite-Noise Delta-4
2HP four sections measuring difference between current input and a captured reference. Signed, inverted, or absolute.

Infinite-Noise Flip-Flop
2HP Polyphonic D-, T-, or SR-Flip-Flop. Outputs for Q, !Q, and change trigger.

Infinite-Noise Slope Detector 2
2HP 2 sections of threshold slope detection (rise/steady/fall), latched phases, configurable Steady hold. Gate or trigger per output.

Infinite-Noise Patch
4HP mutable patch with 8 in/out pairs. Typically used as a pair to patch between them.

Infinite-Noise Turing Machine
10HP Turing machine for random sequences of 3-32 steps. 16 gate/trigger (also poly) and 2 value outputs. Lock, quantize.

Infinite-Noise Bits-to-Value
8HP converts 8 bits (individual gates and/or poly) into a CV value based on weights and range.

Infinite-Noise Value-to-Bits
4HP converts a CV input (clamped to range) into 8 mono gates plus one poly (up to 16 bits/channels).

