Cardamom Tools Pitagora
Karplus-Strong plucked resonator
Cardamom Tools Pentedattilo
Envelope with morphing curves and loop
Cardamom Tools Morgana
LFO, stepper and chaos in one shape
Cardamom Tools Milone
Dual VCA with four-quadrant ring modulation
Cardamom Tools Naca
Utility: S&H, glide, send/return, gather
Cardamom Tools Timpa
Stereo delay with tape flutter and tone
Cardamom Tools Riace
Flanger, chorus and ensemble as one surface
Cardamom Tools Refolo
Stereo phaser, 2 to 16 allpass stages
Cardamom Tools Sila
Stereo reverb, independent size and decay
Cardamom Tools Sibari
Stereo frequency shifter, up to ±1 kHz
Impossible Knot Bloom
Shimmer reverb with control over when the octave arrives and how fast it builds
Impossible Knot Tangle
Stereo wavefolder and saturator with CV over every shaping control, asymmetric stereo response, and cross-channel excitation.
GPaudio Clamp - Note Range Limiter
Limit Note Pitch (V/Oct) to a Range. Drop, limit or octave-shift out-of-range notes
GPaudio Chained Mixer Extended Channel
Extended Chained Mixer Channel for Mono and Stereo Inputs with Additional Aux Pre/Post Switching, Input Trim, Direct Outs and CV Inputs for Gain, Mute and Solo
GPaudio Triple Control Merge
Play your synth from three keyboards, MPE controllers or sequencers simultaneously
GPaudio Dual Control Merge
Play your synth from two keyboards, MPE controllers or sequencers simultaneously
Eternal Eclipse Eternal Eclipse
Resizable blank panel bearing the Eternal Eclipse corona. Drag either edge to set the width from 3 HP upward; the corona scales to fit.
Eternal Eclipse Syzygy
Orbital note generator — sixteen beads joined by a line drift around a field at speeds in powers of the golden ratio from a golden-angle sunflower, through five task figures (orbit, Lissajous, rose, star, sweep), with mass physics, wall bounce and mouse throw, an angular trigger arc, a fourteen-scale quantizer, and eight CV/gate pairs allocated Ansible-style; every parameter is a bare ±5 V input read once per EPOCH lap, made for Cosmic Clock.
SignalFunctionSet Flock
A murmuration as a microtonal granular voice: flocking birds, grains as their calls.
SignalFunctionSet Field
Nineteen related random voltages: one smooth random field read at nineteen points.
SignalFunctionSet PolyKit In
Expander for Kit: every input of every instrument as its own jack, 13 by 8.
Infinite-Noise Envelope Phase Expander
2HP expander for ADR/ADSDR: phase gates (Attack, Decay, Sustain, Delay, Release, Idle) plus Rise, Steady, Fall. Idle can output phase position (0V to 10V).
Infinite-Noise ADSDR Envelope
6HP Attack-Decay-Sustain-Delay-Release envelope with attack/decay/release time and shape, and levels for Attack, Sustain and Release. Rate Chaos can affect each time-setting, changed at each cycle.
AmbientModules LunarFilter
Dual 12dB Polivoks-style multimode (Low-pass/Band-pass) filter with independent per-side CV, Link, a shared distortion stage with CV, and a stereo FX-insert loop (Send/Return, Blend, Master)
AmbientModules LunarDetector
External-source preamp with an Attack/Release envelope follower and a hysteresis gate detector
Teia Synthesizers vcATeam
Dual velocity VCA. Each channel is a main VCA with offset, attenuverted CV and a linear/exponential response switch, feeding a linear velocity VCA whose input is normalled to 5 V. Both channels are summed to a mix output. Software port of the Teia Synthesizers vcATeam Eurorack module.
Teia Synthesizers DriftLog
Dual random CV generator with slope shaping, per-channel loop buffers, lock and logic outputs. Software port of the Teia Synthesizers DriftLog Eurorack module.
Ormer Modular Shoal Expander
12 CV inputs to modulate any track; chainable; sits either side of Shoal.
Ormer Modular Shoal Outs
Per-track Currents (seeded drift CV) and end-of-sequence triggers; sits either side of Shoal.
Ormer Modular Shoal
8-track generative melody sequencer. Melodies grown from seeds, never stored.
Protoseq Gina's Expander
CV expander for Gina's ARP seed, arpeggio length, and rotation control.
VCV Library Instructions
- Download and install VCV Rack.
- Register for a VCV account and log in using Rack’s “Library” menu.
- Add or purchase a module on the VCV Library.
- Open the “Library” menu in Rack, click “Update all” (if updates are needed), and restart Rack once downloaded.
- Right-click an empty rack space to launch Rack’s module browser to add a module to your patch.
All plugins on the VCV Library are available for Windows, Mac, and Linux.
The “major” version (i.e. MAJOR.MINOR.REVISION) must match between Rack and its plugins.
For example, Rack 2.* can only load 2.* plugins.
Missing or incorrect information in this database, such as a missing tag? Inform the plugin author(s) using the contact information on their plugin/module page.
Developers: see Adding your plugin to the VCV Library.
Notes
Purchasing plugins with the “VCV” brand supports the VCV Rack project. See VCV’s Mission Statement to learn how VCV Rack development is funded.
Prices are in US Dollars.
By purchasing a plugin on the VCV Library, you agree to VCV’s End User License Agreement and Refund Policy.
Contact VCV Support for customer support and questions about the VCV Library.