stoermelder MIDI-STEP
Module for relative modes of endless knobs on your MIDI controller, such as Arturia Beatstep, Native Instruments Komplete Keyboards or Behringer X-TOUCH. Converts the relative-encoder output into increment and decrement triggers for use with PILE, SAIL and others.
stoermelder MIRROR
Utility for synchronizing module parameters. Keeps multiple instances of the same module in lock-step, with eight assignable CV ports to drive any parameter of the bound modules.
stoermelder PANIC ROOM
Restricts your modular space within Rack, making it impossible to patch outside of a defined area. Modules moved outside the learned boundary are automatically disabled and re-enabled when brought back inside.
stoermelder PILE
Translate increment triggers or decrement triggers in an absolute voltage, especially useful with MIDI-STEP, with slew support. Monophonic version with configurable unipolar/bipolar ranges, step size and exponential slew.
stoermelder POLY-PILE
Translate increment triggers or decrement triggers in an absolute voltage, especially useful with MIDI-STEP, with slew support. Polyphonic version of PILE handling up to 16 channels independently.
stoermelder ReMOVE Lite
Recorder for parameter automation. Captures movements of any module parameter into up to eight monophonic sequences with touch, replace, overwrite and latch modes, plus CV-controlled playback phase.
stoermelder ROTOR Model A
Rotates a signal across polyphonic channels. A monophonic carrier is spread over a configurable number of output channels, with a CV-driven modulator determining how it pans between them.
stoermelder SAIL
Control any parameter currently hovered by mouse with CV, especially useful with MIDI-CC or MIDI-STEP. Offers differential and absolute input modes, increment/decrement triggers, and a fine-control modifier for precise edits.
stoermelder SIPO
Serial-in parallel-out shift register with polyphonic output and CV controls for skipping and incrementing on sampled values. Sample an input, then shift and step through stored voltages across polyphonic channels with CV-modulated skip and step size.
stoermelder SIREN
Sample browser collaboration with Omri Cohen — browse, preview and drag WAV/FLAC/MP3 samples to other modules. Streams audio directly from disk with no full-file loading, making it practical for large sample libraries and long recordings. Also does repitching and creates endless loops.
stoermelder SPIN
Utility for converting mouse-wheel movement into triggers, also handles middle-click of mouse, useful for SAIL. Outputs increment and decrement triggers from scrolling and gates from the middle button, with configurable keyboard modifiers.
stoermelder SPLICE-KIT
8x8 matrix patch-bay for creating and removing cables by pressing button pairs. Stores up to eight independent scenes per instance, with full MIDI control and feedback for playing your patch from a grid controller.
stoermelder STRIP
Manage a group of modules by using the expander-mechanism, providing load, save, copy, paste, disable, enable and randomize. Operate on the whole row of modules to the left or right of STRIP, with optional per-parameter randomisation lists.
stoermelder STRIP-BAY
Utility module for STRIP keeping inputs/outputs connected. Provides patchable sockets that stay connected across patches, so loading new strips into STRIP does not break your cabling.
stoermelder STRIP++
Adds hotkeys for pasting and importing selections while preserving parameter mappings. Previews the selection on the cursor, then commits it with a click — perfect for reusing patches with MIDI-CAT, CV-MAP and GLUE intact.
stoermelder STROKE
Utility for converting hotkeys to triggers, gates and some other special commands. Maps up to ten hotkeys or mouse buttons to polyphonic triggers and gates, with optional modifiers and special commands not available elsewhere in Rack.
stoermelder TRANSIT
Parameter-morpher and sequencer for up to 96 snapshots. Binds to any module, captures parameter snapshots, morphs smoothly between them and steps through them with clock and trigger inputs.
stoermelder X4
Dual multiple for parameter-mapping. Maps four separate knobs to a single parameter, useful for driving the same target from MIDI-CAT and CV-MAP simultaneously or for multi-controller setups.
stoermelder µAFFIX
Insert for polyphonic cables for adding offsets in Volt, semitones or octaves (8 channels).
stoermelder µINFIX
Insert for polyphonic cables. 8-channel variant of INFIX for inserting or replacing individual channels within a polyphonic signal using monophonic cables.
stoermelder µMAP
Add CV automation to one parameter of any module. A focused single-slot version of CV-MAP for adding one CV input where the module has none, with optional polyphonic input support.
Patchable Devices Comparing Counter
Pulse counter / frequency divider with advanced comparator input
Patchable Devices Digital Chaotic System
Digital 8-bit Shift Register driven by two independent VCOs
Clock generatorClock modulatorFunction generatorLogicLow-frequency oscillatorNoiseOscillatorRandomSequencerUtility
THEREELPEET Phrasing
Phrasing and presence controller. Shapes rests, repeats, changes, and level-focused dynamics; intended to drive VCAs or Morph 4-style level CV inputs.
4ms Decay
Decay envelope with built in VCA
UtilityDrumEnvelope generatorVoltage-controlled amplifierVoltage-controlled amplifier
Quostate MorphfastMini
Clock-synced voltage transition generator with Ramp, RampBack and Step curves, delay and easing.
Rigatoni Modular Thru Zero
A small waveshaping utility that mimics soft oscillator sync for input ramp waves and acts as a through zero FM helper
Roomi Fields OSC Controller
Remote-controls the whole Rack patch over OSC: set/get any parameter (by id or name), add/remove cables and modules, load/save presets, dump patch state, and serve an OSCQuery namespace for TouchOSC/Open Stage Control. Passthrough-compatible with osc-bridge.
VCV Library Instructions
- Download and install VCV Rack.
- Register for a VCV account and log in using Rack’s “Library” menu.
- Add or purchase a module on the VCV Library.
- Open the “Library” menu in Rack, click “Update all” (if updates are needed), and restart Rack once downloaded.
- Right-click an empty rack space to launch Rack’s module browser to add a module to your patch.
All plugins on the VCV Library are available for Windows, Mac, and Linux.
The “major” version (i.e. MAJOR.MINOR.REVISION) must match between Rack and its plugins.
For example, Rack 2.* can only load 2.* plugins.
Missing or incorrect information in this database, such as a missing tag? Inform the plugin author(s) using the contact information on their plugin/module page.
Developers: see Adding your plugin to the VCV Library.
Notes
Purchasing plugins with the “VCV” brand supports the VCV Rack project. See VCV’s Mission Statement to learn how VCV Rack development is funded.
Prices are in US Dollars.
By purchasing a plugin on the VCV Library, you agree to VCV’s End User License Agreement and Refund Policy.
Contact VCV Support for customer support and questions about the VCV Library.