Infinite-Noise Poly-Value Compare
Perform value-compare (MIN,MAX,NtZ,FfZ,AVG,R/S) on all channels of same polyphonic-signal. Can also monitor (MIN,MAX,NtZ,FfZ,AVG,R/S) over time (since last reset), accross all channels or individually for each channel.
Infinite-Noise Poly-Logical Compare
Perform logical-compare (AND,OR,XOR,NAND,NOR,XNOR) on all channels of same polyphonic-signal.
Infinite-Noise Poly-Tweak Mk II
Invert/Disable (mute/remove) channels of a polyphonic signal based on CV-inputs. Can also be used to mix individual channels of two polyphonic signals.
Infinite-Noise Poly-Tweak Mk I
Invert/Disable (mute/remove) channels of a polyphonic signal based on buttons. Can also be used to construct a polyphonic signal with up to 16 gates.
Infinite-Noise Poly-Shuffle
Add/Remove/Shuffle channels of a polyphonic signal. Can also be used to construct a polyphonic signal with up to 16 gates.
Infinite-Noise Poly-Quad
Encode/Decode 4 monophonic signals to/from 4 channel polyphonic signals (basically an up to 4 channel merger/splitter).
Infinite-Noise Poly-Stereo
Encode/Decode 2 monophonic left/right signals to/from 2 channel polyphonic signals.
Infinite-Noise Poly-Split
Split a polyphonic signal into (up to) 16 monophonic signals (or multiple polyphonic signals).
Infinite-Noise Poly-Merge
Merge (up to) 16 monophonic signals (or multiple polyphonic signals) into a polyphonic signal.
Infinite-Noise Sample and Update
Sample-and-Update with button/CV for Sample, Reset and Update. Can also count number of triggers detected, and output a trigger when the desired count have been reached.
Infinite-Noise S&H/T&H-2x4
Sample/track-and-hold with 2 sections (4 input/output), each triggered by input or internal LFO.
Infinite-Noise S&H/T&H-2
Sample/track-and-hold with 2 sections (1 input/output), each triggered by input or internal LFO.
Infinite-Noise Value Comparator-2 Mk II
One section of value-compare: Min, Max, NtZ, FtZ, Abs-diff, Avg, and one section of Int/Frac and simple math: Plus, Minus, Mul, Div.
Infinite-Noise Value Comparator-2 Mk I
Value compare with true/false input, threshold and two sections of: A=B, A!=B, A>=B, A>B, A<=B, A<B.
Infinite-Noise Value Comparator-1
One section of value-compare: A=B, A!=B, A>=B, A>B, A<=B, A<B, with threshold knob, A/B-cross trigger and tolerance-clamp.
Infinite-Noise Logic Comparator-6x2
6 sections each with 2 input for Logic compare (AND, NAND, OR, NOR, XOR, XNOR).
Infinite-Noise Logic Comparator-2
2 sections of logic compare, with true/false input, and two sections of: AND, NAND, OR, NOR, XOR, XNOR.
Infinite-Noise Tiny Logic Comparator-2
2 sections with 4 inputs for logical compare: AND, OR, XOR (and negated via context-menu).
Infinite-Noise Merge2x4
Merge with 2 section each with 4 inputs (merge can either sum or mix, and can have special handling of negative values).
Infinite-Noise Merge/Mult-4
Merge/Mult with 4 inputs/outputs (merge can either sum or mix, and can have special handling of negative values).
Infinite-Noise Manuel CV 8 Mk II
Controller to manually set 8 fixed ON/OFF CV outputs, and switch between them (mono/polyphonic).
Infinite-Noise Manuel Push 2
Controller with 2 buttons, that each fires a gate and high/low-triggers. Can also convert gates to triggers (or vice versa).
Infinite-Noise Manuel Trigger, Gate and CV
Controller to manually output 1 trigger-, 2-gate and 2 CV-signals.
Infinite-Noise Tweak-8
8 section: (individual) knob/CV-controlled (1x,2x,5x,10x) attenuverter/amplifier, offset, mixer.
Infinite-Noise Tweak-4 Mk II
4 section: (individual) knob/CV-controlled (1x,2x,5x,10x) attenuverter/amplifier, offset, mixer.
Infinite-Noise Tweak-4 Mk I
4 section: (same) knob controlled (1x,2x,5x,10x) attenuverter/amplifier, offset.
Infinite-Noise Tweak-2 Mk II
2 section: (individual) knob controlled (1x,2x,5x,10x) attenuverter/amplifier, offset, mixer.
Infinite-Noise Tweak-2 Mk I
2 section: (same) knob/CV-controlled (1x,2x,5x,10x) attenuverter/amplifier, offset.
Roomi Fields OSC Controller
Remote-controls the whole Rack patch over OSC: set/get any parameter (by id or name), add/remove cables and modules, load/save presets, dump patch state, and serve an OSCQuery namespace for TouchOSC/Open Stage Control. Passthrough-compatible with osc-bridge.
SignalFunctionSet Arrange
Song-form sequencer: a chain of 8 phrases, each with its own length, key and tempo.
SignalFunctionSet Record
Auto-sampler: drives a voice across notes and velocities, then writes WAVs + .sfz.
Nevertrustrobots Nevertrustrobots Wabot
HTTP bridge that lets Claude AI read and control your VCV Rack patch in real time. Connect it to Claude using the MCP Server + Skill available at https://www.patreon.com/c/nevertrustrobots
Cella Loudness CV
Loud and Loudness Meter expander with scaled overshoot and signed-error output modes
VCV Library Instructions
- Download and install VCV Rack.
- Register for a VCV account and log in using Rack’s “Library” menu.
- Add or purchase a module on the VCV Library.
- Open the “Library” menu in Rack, click “Update all” (if updates are needed), and restart Rack once downloaded.
- Right-click an empty rack space to launch Rack’s module browser to add a module to your patch.
All plugins on the VCV Library are available for Windows, Mac, and Linux.
The “major” version (i.e. MAJOR.MINOR.REVISION) must match between Rack and its plugins.
For example, Rack 2.* can only load 2.* plugins.
Missing or incorrect information in this database, such as a missing tag? Inform the plugin author(s) using the contact information on their plugin/module page.
Developers: see Adding your plugin to the VCV Library.
Notes
Purchasing plugins with the “VCV” brand supports the VCV Rack project. See VCV’s Mission Statement to learn how VCV Rack development is funded.
Prices are in US Dollars.
By purchasing a plugin on the VCV Library, you agree to VCV’s End User License Agreement and Refund Policy.
Contact VCV Support for customer support and questions about the VCV Library.