Clock divider with downbeat extract.
Synchronized delay with shortening. To synchronize with a buffer but delayed by a bar or some other timed quantity.
Clock to CV generator. Needs MIDI clk, cont, stop and start. Produces a time based CV.
Clock distribution randomizer. Generates a random like sequence of length 64 and depending on the left-most displayed letter outputs a trigger when the clock is high or low.
Sequential switch based on ML switches, with trigger generator to add burst of trigs to yout patterns
Lunetta Modula CD4015 Dual 4-Stage Static Shift Register
Dual 4-Stage Static Shift Register
Lunetta Modula CD4017 Decade Counter/Divider
Lunetta Modula CD4020 14-Stage Ripple-Carry Binary Counter/Divider
14-Stage Ripple-Carry Binary Counter/Divider
Lunetta Modula CD4022 Octal Counter/Divider
Lunetta Modula CD4024 7-Stage Ripple-Carry Binary Counter/Divider
7-Stage Ripple-Carry Binary Counter/Divider
Lunetta Modula CD4040 12-Stage Ripple-Carry Binary Counter/Divider
12-Stage Ripple-Carry Binary Counter/Divider
Lunetta Modula CD4516 Presettable Binary Up/Down Counter
Presettable Binary Up/Down Counter
ML Modules BPM Tools
detect incoming clock and output voltages for Fundamental LFO and Delay
ML Modules Counter
Create Trigger pulses after a certain number of clock ticks
ML Modules OctaFlop
8 Flip Flops, pre-wired as binary counter
ML Modules OctaTrig
Gate tp Trigger converter
Mockba Modular Countah
Simple clock counter
Mockba Modular Dividah
Simple clock divider
Quantiser with triggers to transpose by a CV controleable interval
Nonlinear Circuits 4Seq
Dual sequencer and clock divider. Panel by jk.
Nonlinear Circuits 8-Bit Cipher
Dual sequencer and clock divider. Panel by jk.
Nonlinear Circuits Divide & Conquer
More clock dividers than you will ever need.
Ohmer Modules BRK ("Break") expander for RKD
BRK ("Break") expander to setup RKD jumpers (inspired from 4ms BO hardware)
Ohmer Modules KlokSpid
CPU-controlled clock generator or clock modulator
Ohmer Modules RKD (Rotate Klok Divider)
Rotate Klok Divider (RKD) module (inspired from 4ms RCD hardware)
Phased Based Microtiming, Ratcheting and Strumming
Utility to sequence phrases by sequencing a sequencer
Micro Timing Sequencer
Euclidean Rhythm Generator
Polyphonic Rhythm Generator
Path Set Shifty
Gate shift register with controllable delays. Create generative gate sequences from a single clock.
Photuri Electronics Fairyfly
Clock divider inspired on the Fireflies flashing behavior and Fairyfly size wings
Triple clock generator that produces synchronised clock signals
Voltage controlled Euclidean sequencer
Voltage controlled clock divider, counter, and delay
Trigger modulator, multiplier and repeater
Dual Euclidean Sequencer
Sha#Bang! Modules Polyrhythm Clock
Clock with 3 layers of embedded rhythms and randomization
Silly Sounds Sesame
A clock modulator for adding repeat and swing to a regular clock signal
Squinky Labs Chopper
Tremolo with synched LFO
Squinky Labs Gray Code
Eclectic clock divider
Starling Via SYNC
clock-synced signal source
Starling Via SYNC3
Starling Via SYNC3XL
3 voice frequency synthesizer
Stochastic Telegraph Fuse
Counts triggers and blocks/allows a signal after hitting a limit. Useful for timed composition changes, simulating components that break with overuse, or scaling a value based on the number of triggers.
Studio Six Plus One Zazel
Parameter Controller for fades and LFO, Ramp generator
Clock modulatorFunction generatorLow-frequency oscillatorEnvelope generatorController
Slime Child Audio Polyrhythm Sequencer
Three-track Polyrhythm Sequencer
SynthKit 1x8 Splitter
1 in 8 out
VCV Library Instructions
- Download and install VCV Rack.
- Register for a VCV account and log in using Rack’s “Library” menu.
- Add or purchase a module on the VCV Library.
- Open the “Library” menu in Rack, click “Update all” (if updates are needed), and restart Rack once downloaded.
- Right-click an empty rack space to launch Rack’s module browser to add a module to your patch.
All plugins on the VCV Library are available for Windows, Mac, and Linux.
The “major” version (i.e.
REVISION) must match between Rack and its plugins.
For example, Rack 2.* can only load 2.* plugins.
Missing or incorrect information in this database, such as a missing tag? Inform the plugin author(s) using the contact information on their plugin/module page.
Developers: see Adding your plugin to the VCV Library.
Purchasing plugins with the “VCV” brand supports the VCV Rack project. See VCV’s Mission Statement to learn how VCV Rack development is funded.
Prices are in US Dollars.
VCV is only responsible for VCV-branded plugins and does not completely review all third-party plugins. VCV does not provide technical support for third-party plugins. Installing plugins from unknown sources may compromise your computer and personal information.
By purchasing a plugin on the VCV Library, you agree to the End User License Agreement and Refund Policy.
Contact VCV Support for customer support and questions about the VCV Library.