VCV Octal Router
Sequential switch matrix
VCV Router 1:4
VCV Router 4:1
Count Modula Mute
A voltage controlled mute
Erica Synths Black WaveTable VCO
Erica Synths Wavetable oscillator
Erica Synths Black Octasource
Erica Synths Octa LFO
Quantizer and scale tuner
A 4x probabilistic attenuverting switch.
A single-channel Baseliner.
A quantizer for custom, CV-modifiable scales.
Count Modula Analogue Shift Register
A dual 4, or single 8, step shift register
Count Modula Attenuator
Dual attenuator with attenuverting option
Count Modula Binary Sequencer
Binary counter based sequencer
Count Modula Boolean AND Gate
4 input boolean AND/NAND gate
Count Modula Boolean OR Gate
4 input boolean OR/NOR gate
Count Modula Boolean VC Inverter
Dual voltage controlled logical inverter
Count Modula Boolean XOR Gate
4 input boolean XOR/XNOR gate
Count Modula Burst Generator
Generates bursts of 1-16 pulses whenever a trigger is received at the trigger input
Count Modula Comparator
Compares the input signal with either an internal or external threshold value and outputs gate signals based on the outcome.
Count Modula CV Spreader
Accepts "Base" and "Spread" CV inputs and creates a set of new CV values that are spread either side of the base value by an amount determined by the spread value.
Count Modula Event Arranger
A VCV Rack implementation of the VC Clock and Event Arranger published in an article by John Blacet in the Jan/Feb edition of Synapse magazine
Count Modula Gate Delay
A dual gate delay line giving up to 40 seconds of delay with voltage control over the delay time
Count Modula G2T - Gate to Trigger Converter
Gate to Trigger Converter
Count Modula Manual CV Generator
A simple dual manual CV generator offering +/- 10V with both coarse and fine controls
Count Modula Manual Gate
A manually triggered gate generator offering a number of simultaneous gate and inverted gate outputs
Count Modula Matrix Mixer
A 4 x 4 matrix mixer allowing up to 4 input signals to be independently mixed to 4 different outputs
Count Modula Minimus Maximus
A signal processor that determines and outputs the minimum, maximum and mean (average) of up to 4 input signals
Count Modula Mixer
A basic 4 input utility mixer with output level control, overload indicator, inverted output and selectable bipolar/unipolar operation
Count Modula Morph Shaper
Morphing controller and wave shaper
Count Modula Multiplexer
A 1 input to 8 output and 8 input to 1 output multiplexer
Count Modula Mute-iple
A dual 4-way/ Single 8 way mutable multiple
Count Modula Shepard Generator
Generates a set of 8 ramp and sawtooth control signals appropriately phased for generation of Shepard tones
Count Modula Dual SR Flip Flop
A dual logical Set/Reset flip flop with enable
Count Modula Trigger Sequencer (8 Step)
Quad 8 step trigger sequencer
Count Modula Trigger Sequencer (16 Step)
Quad 16 step trigger sequencer
Count Modula Tapped Gate Delay
A gate delay that offers up to 40 seconds of delay with tapped outputs at equal intervals along the delay line
Count Modula Voltage Controlled Polarizer
A dual voltage controlled polarizer
Count Modula Voltage Controlled Switch
Selects between 2 inputs or routes 1 input to one of 2 outputs based on the level of the signal at the CV input
Count Modula Voltage Inverter
A quad voltage inverter that inverts signals around zero
Ring modulatorVoltage-controlled amplifierPolyphonicAttenuatorControllerMixerQuad
OscillatorSynth voicePolyphonicDigitalLow-frequency oscillator
VCV Library Instructions
- Download and install VCV Rack.
- Register for a VCV account and log in using Rack’s “Library” menu.
- Add or purchase a module on the VCV Library.
- Open the “Library” menu in Rack, click “Update all” (if updates are needed), and restart Rack once downloaded.
- Right-click an empty rack space to launch Rack’s module browser to add a module to your patch.
All plugins on the VCV Library are available for Windows, Mac, and Linux.
The “major” version (i.e.
REVISION) must match between Rack and its plugins.
For example, Rack 2.* can only load 2.* plugins.
Missing or incorrect information in this database, such as a missing tag? Inform the plugin author(s) using the contact information on their plugin/module page.
Developers: see Adding your plugin to the VCV Library.
Purchasing plugins with the “VCV” brand supports the VCV Rack project. See VCV’s Mission Statement to learn how VCV Rack development is funded.
Prices are in US Dollars.
VCV is only responsible for VCV-branded plugins and does not completely review all third-party plugins. VCV does not provide technical support for third-party plugins. Installing plugins from unknown sources may compromise your computer and personal information.
By purchasing a plugin on the VCV Library, you agree to the End User License Agreement and Refund Policy.
Contact VCV Support for customer support and questions about the VCV Library.